LIGHT & OPTICS / INTERACTIVE LAB

Refraction lab.

Change the medium. Follow the light. Discover the relationship.

SNELL’S LAW
n₁ sin θ₁ = n₂ sin θ₂

All angles are measured from the normal.

01 Ray diagram LIVE

Live ideal refraction diagram The incident and refracted rays meet at a planar interface.
Incident ray Refracted ray Normal
Ideal-model results; these are calculated, not measured.
Incidence θ₁Refraction θ₂Medium transition
30.00°19.47°Lower → higher
IDEAL MODELPlanar interface · no intensity or polarization

Start with a question

Apply an example, then make it your own.

Loading local examples…
Prediction & observationsOptional · saved with your next point

Write your prediction first, then observe the model.

An optional measurement from a separate physical experiment. Blank means not recorded.

Calculated results and your measurements stay separate.

YOUR EXPERIMENTS

Experiment notebook 0

Save a few angles. Swap the media. Compare what changes.

+

A place for your discoveries

Save your first experiment above. Every point keeps its own parameters and results.

Try at least three angles, then swap the media.

A model for understanding. This lab demonstrates an ideal planar interface. Surface roughness, absorption, and scattering are not simulated; model values are not experimental measurements.

LIGHT & OPTICS

Follow the light.

Use this workspace to explore Snell’s law and keep evidence of what you discover.

  1. 01

    Make a prediction

    Open Prediction & observations and write what you expect before changing the angle.

  2. 02

    Change one condition

    Use a slider or type a number. Indices range from 1 to 2.5; incidence ranges from 0° to 89.9°, measured from the normal.

  3. 03

    Save and compare

    Try at least three angles, then swap the media and measure again. Any number of points may be saved. Select two or three for comparison.

The ideal model

s = n₁ sin θ₁ / n₂

If s > 1 + 10⁻¹⁰, total internal reflection occurs and no refraction angle is defined. Otherwise, θ₂ = asin(min(1, s)). At the critical point, θ₂ = 90°.

A critical angle, θc = asin(n₂ / n₁), exists only when n₁ > n₂. During total internal reflection, the reflected angle equals the incident angle.

The notebook labels calculated values as model results. Add separate physical measurements if available. The diagram shows geometry only: no intensity, polarization, or real ray tracing.